Print Your Pancakes

Explore >Buy Now >
What are your print settings? I´ve done my first tests with the "hello kitty" file....

My first prints were done with medium power on the griddle and print speed at 100%.
It seems that the pressure wheel decides about the print quality:
Pressure wheel < 4 makes very sharp lines, but the prints are not very continuous. They get some gaps in between.
Pressure wheel > 5 seems to be good to fill bigger shapes. But thin lines get blurred.

What are your experiences?
  • Miguel Valenzuela The pressure wheel determines the flow rate of the batter and is used to create thick or thin lines. There is a factor of speed also but you need to make sure you update the firmware on the bot to control the speed. Visit this link for instructions. http://www.pancakebot.com/firmware-update